Confirmed Black Mold in Portland, OR:
Type III Containment & Removal

No. Many mold species produce dark or black-appearing growth: Cladosporium, Aspergillus niger, Aureobasidium, and Ulocladium are all common in Portland, OR properties and all appear dark. Stachybotrys chartarum is identified by species-level laboratory analysis of a surface sample — not by color. The distinction matters because the removal protocol (containment tier, PPE level, disposal requirements) is determined by the confirmed species, and applying Type III Stachybotrys protocol to what turns out to be Cladosporium adds unnecessary cost, while applying a lower-tier protocol to confirmed Stachybotrys is an inadequate response.

Trichothecene mycotoxins survive in dead Stachybotrys cells. Biocide treatment kills the living mold but leaves mycotoxin-containing material in place. IICRC S520 specifies complete physical removal of all Stachybotrys-contaminated porous materials — not in-place treatment. Contractors who offer in-place biocide treatment for confirmed Stachybotrys aren't following the industry protocol.

Temporary relocation during Stachybotrys removal is our standard recommendation for households with vulnerable occupants. Type III containment protects unaffected areas of the property, but for high-risk occupants, temporary relocation during the active removal phase is the most protective approach.

Post-removal confirmation uses independent IH-collected air samples from the previously contaminated zone and outdoor comparative samples — analyzed by an accredited lab. Acceptable post-clearance parameters mean indoor Stachybotrys spore counts are at or below outdoor baseline levels in the treated zone. The written IH clearance report documents this comparison. We don't self-certify clearance — the independent IH provides the objective confirmation.

Stachybotrys chartarum requires consistently wet cellulosic material to establish — not just high humidity, but material that has been continuously wet for an extended period. Common sources in Portland, OR properties include: chronic roof leaks that saturate the drywall or insulation below; long-term plumbing leaks inside wall assemblies; slab leaks that maintain wet conditions on floor material above; basement flooding that isn't completely dried within 48–72 hours; and HVAC condensate leaks onto drywall or ceiling tile. Its presence is always evidence of a sustained moisture source, not just a humidity problem.